2013 Ford Expedition

This has been a great vehicle. We were going down a road around 60 mph and with no warning or symptom the car downshifted from 6th to 1st gear. This caused the rear end to lock up causing the tires to squeal and spin the car around sideways in the road. Luckily nothing was coming. This could have easily been a deadly accident if something was coming. The dealer has said the lead frame was bad a needed to be replaced. They have quoted $1,200. The vehicle only has 117,000 miles on it and it still under the mileage for the extended coverage but not the years. There are tons of vehicles with this transmission and lead frame on the road, this is a major safety issue that should be addressed. A check engine light or no other warnings have ever come on. Having these lead frames out there are just an accident waiting to happen. Luckily, ther was no one coming when mine decided to fail.

The contact owns a 2013 Ford Expedition. The contact stated while driving at 70 MPH, the vehicle downshifted with the check engine warning light illuminated. The contact also noticed that the instrument panel became inoperable and would not function properly when the contact attempted to shift gear. The vehicle was able to restart. The vehicle was taken to an independent mechanic, where it was diagnosed that the output speed sensor had failed and needed to be replaced. The vehicle was not repaired. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline for further assistance. The failure mileage was approximately 117,000.

2/13/19- Ford Issued Recall on 2013 Ford Expedition for OSS failure and downshift 2/20/19- I go to the Preston Ford Mazda dealership, Maryland. I view and test drive a 2013 Ford Expedition, during the test drive the RPMs ran high on the Expedition and it felt sluggish and “off” crossing a road, and at one point it jumped, and the wrench symbol came on as we were returning. My concern was shrugged off by my salesman, as he said ‘maybe Fords are just like that’. As we returned, and had the issue with the wrench symbol, salesman advised me “ well when you came and interrupted as they were just getting this thing checked out and tested.” 2/19/19 When I returned following days to purchase, the vehicle was not ready. It turned out the battery had died and they had some other issue with a “computer code”. They put in another battery on hand, and told me I should now be “good to go”, knowing that I was in desperate need of a vehicle, and would likely be trusting if they told me it was now repaired. At this point we were within manufacturer’s warranty, and under 60k miles. -was never informed that there was a recall issued by Ford that EXACTLY applied to our vehicle, and to the issue I Reported during my test drive, under warranty, and Preston Ford Mazda never correctly repaired the issue as they stated, which was reported within all Ford and recall time and mileage requirements. [XXX]-while driving suddenly speedometer went out, the gas gauge stopped working, and then, a moment later while trying to figure that out, the vehicle jumped and shuddered/stopped and the RPMS went wild, revving. Almost hit cars, but was able to pull to the side of highway. Upon turning the vehicle off and restarting, normal operation resumed, but issue with the wrench symbol, gauges, RPMs revving and vehicle jump/stop has now happened repeatedly, leaving me with no safe transportation for my large family. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Ford had a customer satisfaction recall (which should be a safety recall, honestly) - 19N01 - that was good for 10 years or 150K miles. My vehicle a 2013 is just outside of that 10 years but under the mileage and I am starting to have issues with the leadframe and main control. Unfortunately for me, I bought the vehicle in spring 2023, but am being told the warranty expired in 2019. Also unfortunately for me, the previous owner did not have the issue fixed. Ford is unwilling to assist with correcting the issue (even after the dealership confirmed this is the issue).

The contact owns a 2013 Ford Expedition. The contact stated that while driving 60 MPH, the RMPS were fluctuating, and the vehicle unexpectedly downshifted to second or to third gear. There was no warning light illuminated. The contact pulled to the side of the road, and then the contact resumed driving. The vehicle was taken to an independent mechanic, where it was diagnosed that the transmission molded lead frame had failed and needed to be replaced. The mechanic replaced the transmission molded lead frame several times; however, the failure persisted. The vehicle was taken back to the mechanic, where the transmission molded lead frame was replaced. The vehicle was temporarily repaired. Several unknown dealers were notified of the failure. The manufacturer was notified of the failure and informed the contact that the vehicle was not covered under Ford Campaign Number: 19N01 because the campaign had expired. The failure mileage was approximately 180,000.

When driving veh wrench light came on veh jerks and drops down to first gear rpm and speed gauges go out for second had to pull over cut veh off and cut it back on to get it home this happened several times took it to the closes shop they said it the transmission speed sensor loosing connection with the computer.

The contact owned a 2013 Ford Expedition. The contact stated that while the vehicle was idling in the daughter's driveway, a mist was present coming from the vents, and moments later the horn activated and flames were seem coming from under the front passenger side dashboard. Flames quickly engulfed the vehicle and the fire department was called to the scene and extinguished the flames. During the incident, the vehicle was destroyed. No injuries were reported. A fire and police report was taken at the scene and the vehicle was towed away. The cause of the failure was not determined. The manufacturer and local dealer were notified of the failure. The failure mileage was 60,000.

The contact owned a 2013 Ford Expedition. The contact stated while driving 45 MPH, the front passenger's side tire blew out, and she lost control of the vehicle. The contact stated that the front end of the vehicle crashed into an embankment, and the vehicle stopped. The contact stated that the front grill and the bumpers detached due to the impact. The contact stated that the driver's side and the passenger's side roof air bags were deployed; however, the front driver's side air bag failed to deploy, causing the contact to hit her face and her head against the steering wheel. The contact sustained black eyes, bruises on the forehead, a scratch on the scalp that extended to her nose, a swollen nose, a swollen forehead, and swollen eyes. The contact had not received medical assistance. A police report was filed. The vehicle was towed to a tow lot, where it was totaled. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 200,000.

I have been having random transmission issues. Its wanting to start off in a high gear. Check engine light comes on. A wrench in the digital display. Speedometer quits working. Sometimes it wont shift, and idles way up by itself. At first turning the key off fixed it for a bit. Now its happening more and more. And now a few times it has downshifted HARD from a high gear to a low one causing us to be in danger on the highway, now fearing for our safety. Now turning off the key is not fixing the problem. It shows a code for output shaft speed sensor circuit fault.

Since more than 18 months, we have the known intermittent problem described in TSB [XXX], where all of a sudden the wrench appears, speedometer drops to zero and car can't change gear anymore. Sometimes going to manual gears works, sometimes car needs to be stopped, locked and completely shut down several times for the problem to go away. Before turning off, error P0720 appears (as described in TSB [XXX]). Car taken to garage in January 2023 where it was for 3 weeks. Technicians drove it for 11 miles (!) and could not reproduce the problem so could not do the required work ie changing the molded leadframe. Now, in January 2024 the problem happened again and this time the Check Engine light came on. The same error code P0720 was now permanently stored. Took the car to the garage, where they were able to diagnose the problem and ... replaced the molded leadframe. This at an out of pocket cost of $1,300. Contacted Ford and they say there is no program or financial assistance in place for this problem, despite all the information that can be found. It is clear this a general problem of all 6R80 gearboxes beyond the time periods stated in the recall. Ford is negligent by not doing a recall on all cars having this gearbox. Nobody is looking at this issue at Ford, when creating a case number they say no program exists, and state paperwork and proof can be sent to a PO BOX in Dearborn (not even an email address to send attachments in this 21st century). All ways to discourage people to react, send in documents or claim documents did not arrive. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2013 Ford Expedition. The contact stated while driving 70 MPH, the check engine warning light illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the transmission molded leadframe. The vehicle was not repaired. The vehicle was then taken to the dealer, who confirmed the diagnosis. The vehicle was not repaired. After investigating the failure, the contact related the failure to Customer Satisfaction Program: 19N01, but the VIN was not included. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 135,000.

The contact owns a 2013 Ford Expedition. The contact stated while driving 65 MPH, the vehicle independently decelerated to 0 MPH. The check engine warning light and the wrench symbol was illuminated. The vehicle was taken to the dealer to be diagnosed. The contact was informed that the failure was due to a faulty main control valve body in the transmission. The vehicle was repaired; however, the failure reoccurred. The manufacturer was made aware of the failure and advised the contact to call NHTSA Hotline for assistance. The failure mileage was approximately 200,080

Transmission, is available for inspection upon request, trans will downshift to 1st gear causing rear wheels to lock up, speedometer to read zero mph, wrench to be displayed, and dashes across digital display on mph. called dealer and was told out of recall/warranty parameters, as well as ford corporate customer service. No inspection, only verbal verification from dealer. No advance warning before malfunction.