14 NHTSA recall campaigns have been issued for the 2001 Dodge Stratus. Click any campaign to view full defect, consequence, and remedy details.
Component: AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2001-2002 Chrysler Sebring and Dodge Stratus vehicles, equipped with beige interiors. The affected vehicles were previously repaired for a recall issue using an incorrect part. The incorrect part may not prevent the passenger side sun visor from detaching if the passenger frontal air bag deploys and the passenger side sun visor is folded down in a certain position.
Consequence: If the passenger side sun visor detaches and is propelled rearward, there is an increased risk of occupant injury.
Full recall detail →
Component: AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2000-2005 Eclipse vehicles manufactured April 5, 1999, to December 17, 2004, 2001-2005 Eclipse Spyder vehicles manufactured January 19, 2000, to March 18, 2005, 2001-2005 Chrysler Sebring vehicles manufactured April 17, 2000, to February 21, 2005, and 2001-2005 Dodge Stratus vehicles manufactured April 17, 2000, to February 22, 2005. In the affected vehicles, the passenger side sun visor may be folded down in such a position that, if the passenger frontal air bag deploys, the passenger side sun visor may detach.
Consequence: If the passenger side sun visor detaches and is propelled rearward, there is an increased risk of occupant injury.
Full recall detail →
Component: EXTERIOR LIGHTING:HEADLIGHTS
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Consequence: DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
Full recall detail →
Component: SUSPENSION:FRONT:CONTROL ARM:LOWER ARM
FEDERAL-MOGUL IS RECALLING CERTAIN REPLACEMENT CONTROL ARM ASSEMBLIES, PART NUMBERS K7425, 10945, FA4510X, K7427, 10946, AND FA4611X, SOLD FOR USE ON VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE BALL JOINT ON THE CONTROL ARM ASSEMBLY CAN FAIL CAUSING THE BALL STUD TO WEAR THROUGH THE CONTROL ARM HOUSING RESULTING IN NOISE AND/OR SEPARATION OF THE BALL STUD FROM THE HOUSING.
Consequence: IF THERE IS A SEPARATION OF THE BALL STUD FROM THE HOUSING, THE DRIVER CAN LOOSE STEERING CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
Full recall detail →
Component: SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
QUALIS AUTOMOTIVE IS RECALLING CERTAIN AFTERMARKET BALL JOINTS SOLD FOR USE ON CERTAIN PASSENGER VEHICLES. THE SOCKET MAY HAVE BEEN EXCESSIVELY HARDENED WHICH COULD CAUSE IT TO CRACK NEAR THE RETAINING RING GROOVE ALLOWING THE BALL STUD TO SEPARATE UNDER IMPACT LOAD. THE SUBJECT BALL JOINTS WERE SOLD AS FOUR PART NUMBERS, D10945, D10946, G10945, AND G10946. THE AFFECTED CONTROL ARMS, D10945 AND D10946, ARE STAMPED WITH THE FOLLOWING DATES ON THE BALL JOINTS: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, AND 116609. THE G10945 AND G10946 ARE THE SAME PART AS THE D10945 AND D10946 RESPECTIVELY. THEY ARE LABELED DIFFERENTLY DEPENDING ON THE AFTERMARKET CUSTOMER.
Consequence: SEPARATION OF THE BALL STUD FROM THE SOCKET OF THE BALL JOINT HOUSING WOULD ALLOW THE CONTROL ARM TO COLLAPSE AND THE WHEEL TO FOLD IN CAUSING LOSS OF STEERING CONTROL, POSSIBLY RESULTING IN A CRASH.
Full recall detail →
Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
CERTAIN CARDONE MASTER CYLINDERS WITH PART NUMBERS 10-2925, 10-2987, 10-2987MZA, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, AND 11-3156, AND WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID.
Consequence: LOSS OF BRAKE FLUID CAN RESULT IN POOR BRAKING PERFORMANCE, POSSIBLY RESULTING IN A VEHICLE CRASH.
Full recall detail →
Component: CHILD SEAT
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, PICKUP TRUCKS AND SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." SOME OF THE OWNER'S MANUALS FOR THESE VEHICLES ARE MISSING INSTRUCTIONS THAT PROVIDE A STEP-BY-STEP PROCEDURE, INCLUDING DIAGRAMS, FOR PROPERLY ATTACHING A CHILD RESTRAINT SYSTEM'S TETHER STRAP TO THE TETHER ANCHORAGE.
Consequence: IN THE EVENT OF A CRASH, THE CHILD SEAT MAY NOT BE PROPERLY ATTACHED INCREASING THE RISK OF INJURY TO THE CHILD.
Full recall detail →
Component: SEATS
VEHICLE DESCRIPTION: PASSENGER VEHICLES. A NUMBER OF INCORRECT DRIVER SIDE SEAT MOUNTING BOLTS WERE INSTALLED INTO VEHICLES.
Consequence: IN THE EVENT OF A CRASH, THE BOLTS MAY NOT PROPERLY SECURE THE SEAT AND COULD CAUSE INCREASED INJURY TO THE DRIVER OF THE VEHICLE.
Full recall detail →
Component: FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE OUTER LAYER ONLY OF THIS 3-LAYER FUEL RETURN HOSE DOES NOT CONTAIN THE DESIRED OZONE PROTECTION DUE TO A PROCESSING ERROR.
Consequence: THIS HOSE IS CONSIDERED TO BE INADEQUATE.
Full recall detail →
Component: AIR BAGS:FRONTAL
VEHICLE DESCRIPTION: PASSENGER VEHICLES. PASSENGER AIR BAGS WERE BUILT WITH SUSPECT ALUMINUM EXTRUSION SECTIONS WHICH MAY NOT RETAIN THE AIR BAG DOOR DURING AN AIR BAG DEPLOYMENT EVENT.
Consequence: A SEPARATED AIR BAG DOOR COULD INJURE A VEHICLE OCCUPANT.
Full recall detail →
Component: STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THROUGH DEGRADATION OF THE BOND BETWEEN THE SILENCER PAD AND A SHEET METAL PANEL (QUARTER INNER UPPER), THE PAD MAY FALL ONTO THE MAP LIGHT LOCATED IN THE REAR SEATING AREA NEAR THE C-PILLAR TRIM PANEL (LH AND RH). THIS CONTACT COULD CAUSE THE PAD TO MELT, CREATING A HOT SMELL AND/OR SMOKE DURING LONG PERIODS OF ILLUMINATION.
Consequence: SMOKE INHALATION COULD BE HARMFUL TO VEHICLE OCCUPANTS.
Full recall detail →
Component: STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
VEHICLE DESCRIPTION: PASSENGER VEHICLES. A NUT IN THE STEERING GEAR ASSEMBLY WAS NOT PROPERLY TIGHTENED, RESULTING IN SYMPTOMS RANGING FROM STEERING WHEEL VIBRATION TO STIFF STEERING, AND IN THE WORST CASE, NO ABILITY TO TURN LEFT.
Consequence: A LOSS OF STEERING CONTROL COULD INCREASE THE RISK OF A CRASH.
Full recall detail →
Component: ENGINE AND ENGINE COOLING:ENGINE
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE HARNESS FOR THE CRANKSHAFT POSITION SENSOR COULD COME IN CONTACT WITH A NEW PROTECTIVE SHIELD CAUSING A GROUNDED CIRCUIT.
Consequence: PROLONGED WIRING HARNESS CONTACT WITH THE HEAT SHIELD WILL CAUSE THE WIRING INSULATION TO WEAR AND EVENTUALLY TO GROUND OUT. THIS COULD CAUSE THE ENGINE TO DIE-OUT, INCREASING THE RISK OF A CRASH.
Full recall detail →
Component: POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS. A HOSE MANUFACTURING PROCESS ALLOWED THE REINFORCEMENT YARD TO BREACH THE INNER LAYER OF SOME AUTOMATIC TRANSMISSION HOSES WEAKENING THE INNER WALL WHICH COULD RESULT IN LEAKAGE OF THE AUTOMATIC TRANSMISSION FLUID.
Consequence: FLUID LEAKAGE FROM THE COOLER HOSES CAN CAUSE TRANSAXLE DRIVEABILITY PROBLEMS AND SMOKE IF THE OIL CONTACTS THE FRONT EXHAUST PIPE.
Full recall detail →