NHTSA recalls, safety ratings, and consumer complaints for the 2017 Ford Escape.
Component: VISIBILITY:POWER WINDOW DEVICES AND CONTROLS
Ford Motor Company (Ford) is recalling certain model year 2017 Ford Escape Titanium and SE vehicles manufactured October 5, 2015, to May 12, 2016. The settings for the closing-force of the power-operated windows may allow the windows to close on an object such as a body part and injure it before the windows auto-reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 118, "Power-Operated Window Systems."
Consequence: If a window closes on a body part, it can increase the risk of injury.
Remedy: Ford has notified owners, and dealers will update the power window operating system software, free of charge. The recall began on September 6, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16C12.
Component: POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
Ford Motor Company (Ford) is recalling certain 2013-2019 Escape, 2013-2018 C-Max, 2013-2016 Fusion, 2013-2021 Transit Connect, and 2015-2018 Edge vehicles. The bushing that attaches the shifter cable to the transmission may degrade or detach.
Consequence: A damaged or missing bushing may prevent the vehicle from shifting into the intended gear, and cause the vehicle to move in an unexpected direction. Additionally, the vehicle may roll after the driver selects the 'Park' position. Either scenario increases the risk of a crash or injury.
Remedy: Dealers will replace the under hood shift bushing and add a protective cap over the shift cable bushing, free of charge. Interim owner notification letters, informing owners of the safety risk, were mailed July 1, 2022. Remedy parts are expected to be available in 4th Quarter 2022. Owner notification letters were mailed October 27, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S43.
Component: EQUIPMENT:ELECTRICAL:ENGINE BLOCK HEATER
Ford Motor Company (Ford) is recalling certain 2013-2018 Focus, 2013-2019 Escape, and 2015-2016 MKC vehicles equipped with a 2.0L engine. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Consequence: An electrical short circuit can increase the risk of a fire.
Remedy: Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded plug, and remove the block heater electrical cord. Interim letters, notifying owners of the safety risk, were mailed March 6, 2026. Additional letters will be sent once the final remedy is available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S01. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 16, 2026.
Coolant leaking into cylinders. Repair shops said it was a known Ford issue with the 1.5 ecoboost engine. Causes the coolant to leak out and the engine to overheat and the overflow tank to leak.
Engines has a severe issue with coolant leaking into the engine cylinders due to a design defect in the engine block. This "coolant intrusion" lead to misfires, engine overheating, and complete engine failure, and is requiring a full engine replacement.
The contact owns a 2017 Ford Escape. The contact stated that while driving at an undisclosed speed, the vehicle shuddered, causing the RPM to fluctuate. The contact received notification of NHTSA Campaign Number: 26V011000 (EQUIPMENT); however, the part to do the recall repair was not yet available. The vehicle was not taken to a dealer. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 157,000.
The contact owns a 2017 Ford Escape. The contact stated that while driving at an undisclosed speed, the engine temperature warning light illuminated. The vehicle was towed to a local independent mechanic to be diagnosed. The contact was informed that the engine needed to be replaced due to coolant intrusion into the engine. The local dealer was contacted; however, the vehicle was not diagnosed or repaired because the VIN was not under recall. Upon further investigation, the contact related the failure to NHTSA Campaign Number: 26V011000 (Equipment); however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 105,459.
The 2017 Ford Escape has 3 NHTSA recalls and 2507 consumer complaints on file. The high number of complaints suggests potential reliability concerns — review the complaint details above before purchasing. For the most detailed information about a specific vehicle, decode its VIN using our free decoder above.
Enter a specific VIN to get the full report — specs, recalls, safety ratings, complaints, investigations, and technical service bulletins.
The contact owns a 2017 Ford Escape. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to Auto Zone, and the contact was informed that there was a misfire in cylinder #2. The contact replaced the ignition coils and spark plugs; however, the following day, the check engine warning light was illuminated, and the contact took the vehicle to another Auto Zone, the vehicle was diagnosed with cylinder #2 misfire. The contact then took the vehicle to an independent mechanic, and there was white smoke coming from the coolant intrusion into the engine. The independent mechanic used a borescope and determined there was coolant intrusion in cylinder #2. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 57,000.
Coolant intrusion into engine from poor design. A known issue which causes overheating which may cause fires or engine failure while driving. With thousands of Ford escape owners affected. It has a recall on certain models but models that aren't on the recall are also affected.
Coolant Intrusion – Engine Defect Concern “Coolant intrusion” is a known engine design defect in which coolant leaks into the cylinders, leading to internal damage, misfires, and eventual engine failure. In our case, we own a 2017 Ford Escape 1.5L EcoBoost, which is now inoperable. The vehicle was properly maintained, with no prior issues. At approximately 103,000 miles, the engine began to fail unexpectedly. There was no overheating condition. Outdoor temperatures were normal (around 75°F), and the vehicle had been running properly up to that point. We have always used good quality fuel and kept up with regular maintenance. The first signs of failure included a check engine light with a cylinder misfire code, followed by noticeable white smoke from the exhaust. At the same time, coolant began rapidly disappearing despite being refilled. There are no external leaks, indicating the coolant is entering the engine internally. The vehicle now will not operate properly and cannot be driven. This failure occurred without warning and without any owner-related cause. Given the widespread reports of identical issues affecting Ford vehicles with this engine, this is clearly not an isolated incident but a systemic design problem. The pattern of coolant intrusion, white smoke, misfires, and sudden engine failure is well-documented among Ford customers. This issue requires immediate attention. It should be addressed as a recall, as it stems from a defective engine design rather than normal wear, misuse, or neglect.
The contact owns a 2017 Ford Escape. The contact stated that while driving approximately 20-65 MPH, there was a misfire coming from the vehicle while depressing the accelerator pedal. There was no warning light illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed with coolant intrusion in the engine caused by a crack in the engine block. The mechanic informed the contact that the failure was a design flaw. The mechanic determined that the engine needed to be replaced. The vehicle was taken to the dealer and was deemed a common failure. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 93,000.
Coolant intrusion into cylinder heads requiring a full engine replacement. Posted in a Ford technical bulletin, but not covered by Ford at all. Expecting full price for service to change the engine.
2017 Ford Escape equipped with 2.0L EcoBoost engine with coolant leaking into engine cylinder head leading to possible safety concerns and engine damage due to coolant intrusion into engine cylinders (according to Ford dealership)
Vehicle suffered acute catastrophic engine failure. No dash lights alerted me. Engine just started rattling and smoking. Dealership it was towed to pulled codes p0302 p0304 p0012 p0014 tried to blame it on us despite known coolant intrusion issue
I have had so many problems with this car And now I cannot drive it. There is coolant in the engine. My car only has 69000 miles on it, great condition other than the engine. I took it to my mechanic I started having problems with it overheating and going right back to normal. Water pump replaced, spark plugs replaced, fuel injector replaced. Spent so much money on it and than started seeing white smoke out the muffler. Water in my resivor was disappearing Coolant in my engine
‘Coolant Intrusion’ - A defect in engine design where coolant leaks into the cylinders, depleting coolant along with damage to motor etc. Overwhelming amount of both frustrated Ford owners suffering from having to pay for engine replacement while not at fault, and even larger amount of PROOF that this should be a recall, that it is still happening after year of insult and that Ford is content to continue not taking responsibility for it. Our 2017 Escape 1.5 eco boost will not even leave the driveway. The first time the vehicle detected “engine overheating” the vehicle dropped to ten miles per hour “limp home mode” and wouldn’t let me steer properly to move off to the side. I was going 50 mph, and almost wrecked. The engine wasn’t over heating, it was 53 degrees outside and I had just pulled out of my driveway.. engine still cold. Now , I can completely fill the engine and reservoir with coolant and it still depletes the coolant as well as won’t drive just to leave the driveway. We cannot afford an engine replacement, but this issue was also certainly not caused by us. This coolant intrusion problem is so far beyond obviously being Ford responsibility because of the massive amount of FORD CUSTOMERS with the same issue (affecting many other models btw) that it is both insulting and fraudulent for this to continue.
Coolant leak and dealership advises that the car will need a engine replacement to fix the problem. The car is constantly running rough and misfiring. Driving this vehicle this way put myself and small children at risk that there could be a potential complete engine failure while driving the vehicle. This problem has been confirmed by the dealership and I was told that Ford Motor Co. is aware of the issue however they are choosing to do nothing about it or offer a recall. The vehicle has been inspected by a police officer who has driven the car and states that the car is very unsafe to drive. The car has a current "check engine" light constantly on. The car also has severe issues with the electrical system and sealing system. The car is now leaking water when it rains through the front windshield. Also, the pain is chipping in areas all over the vehicle.
My vehicle was inspected by a mechanic after experiencing sudden loss of power and stalling while merging onto the expressway in active traffic. At the time of the incident, the vehicle became unable to accelerate properly, creating a serious safety hazard due to surrounding vehicles traveling at highway speeds. The mechanic determined that the fuel pump had failed. During inspection prior to replacement, the mechanic identified metal shavings present in the fuel system, which appear to have originated from the fuel pump. These metal fragments contaminated the system and pose a risk of further engine damage. This failure appears to be related to a known issue involving fuel pump defects in Ford vehicles. The design and/or function of the fuel pump may allow internal deterioration that leads to system-wide contamination and potential engine failure. This issue presents a serious safety concern due to the risk of sudden stalling and loss of power while driving, particularly during high-speed merging conditions.
Showing 15 of 2507 complaints